• Clear 3D Printing Resin Hi-Definition 300mL


Appearance:Clear Light Yellow
Specific Gravity g/cm:1.052
W Length:365-450nm
Thickness Suggest :25micron-100micron
Exposure that give 100micron:20mJ/cm²
Exposure that give 200micron:55mJ/cm²
Tensile Modulus : 1000Mpa
Water absorption% 2h@100°C: 0.25%
Hardness Shore D:80D
Tensile Strength at break:30Mpa
Elongation at Break:4.39%
Izod Impact(Notched):53J/m
Tensile Modulus : 1000Mpa

Low VOC , Low Odor , High Definition , Less viscous and More Colours.

Special formula for most of home based DLP/SLA/UV Light Curable 3D Printing Systems.

  • Store product indoors in black tightly closed containers at temperatures 5°C ~ 50°C.
  • Easier to clean out by Alcohol rubbing.
  • The resin will be fine as new for 1year.
  • When using UV lasers or LEDs, the cure time is very fast, do not setup with too much curing time.

The resin should be post cured by placing in uv lamp or direct sunlight for the best properties after created a newly object from DLP 3D Printers.

If resin has sat for a very long time, please shaking before use to ensure color pigment is well dispersed, allow 5-10 minutes before pouring for air bubbles to dissipate.

Use protective eyewear and gloves when handling liquid resin and cleaning up newly created objects.

3 Container sizes 300mL/0.3KG , 600mL/0.6KG , 1.2L/1.2KG , if you asking for more resins than 20KG please contact us.


Clear 3D Printing Resin Hi-Definition 300mL

  • Brand: venuscreator
  • Product Code: VC7614-300
  • Availability: Out Of Stock
  • $39.99